Printing Ink Bucket Scraper

 

We Can Customize to Any Size Bucket / Barrel

 

 

No More Hand Scraping Expensive Printing Ink

 


No More Wasted Ink
Today every company needs to run lean and the printing industry is no stranger to escalating raw material costs. To a printing company, wasted ink is literally throwing money away. Each and every time your employee’s scrape inks from buckets using traditional bucket scrapers your printing business loses money in 3 ways:
 

 
All Types of Printing Ink Removal
Due to the high cost of liquid and dry ink it is extremely important for all of the surplus ink to be removed efficiently from the capture barrel in order to utilize all of it. No matter the type of ink you are using from high to low viscosity the SPINOUT ® Patent Pending quickly and effectively removes all of the ink from the container. Scraper tools and spatulas are messy and time consuming. The SPINOUT ® Patent Pending works with all types of inks like high volume water and solvent liquid packaging inks and coatings.

If you are planning on capturing unused ink with a short pot life the SPINOUT ® Patent Pending can make difference in how much ink you previously were unable to use due to slow and tedious methods utilizing spatulas and hand scrapers.

 
 
Ink
Ink manufacturing and processing is a delicate process. The ink itself is made from four basic components, which includes the pigments, resins, solvents, and additives. Because of this, ink handling and transfer can be a tedious task. Manually scraping your containers or buckets can take a lot of time. The repetitive motion can also be a risk for injury. By using the SPINOUT Patent Pending Bucket Scraper, you eliminate all these problems. You’ll definitely save time with this technology because it’s quick and easy to use. Simply put your bucket on top of our scraper and rotate the container. You’ll get the most out of your container and reduce waste in the process. There are 2 standard sizes to choose from. Since we are the manufacturers of the SPINOUT Patent Pending Bucket Scraper, we can customize the size for your container.

 
 
Printing Bucket Scraper Customization
Our bucket scraper can work with any type of ink. Because we are the manufacturer of the SPINOUT ® Patent Pending, we can customize the SPINOUT ® Patent Pending to any size container or vessel. We also can customize your unit with Stainless Steel for more abrasive inks.
 
 
Ease of Use
Because the SPINOUT ® Patent Pending bucket scraper is so simple to use there is no need to train your employee’s how to use the SPINOUT ® Patent Pending to its full potential. The SPINOUT ® Patent Pending only requires 3 simple steps.
 
 

The SPINOUT ® Patent Pending is that simple to use.
 
 
Employee Safety
The SPINOUT ® Patent Pending bucket scraper eliminates the need to use plastic scrapers and spatulas when trying to get every last bit of printing ink. Your employee’s will also no longer need to use razor scrapers which can be very dangerous when improperly used.

The potential for repetitive motion injuries is reduced when your employee’s no longer have to use a plastic scraper or spatula to utilize all the ink.
 
 
Mixing Pad & Screen Printing Ink
The SPINOUT ® Patent Pending can be utilized in mixing bulk dry ink as well as liquid ink. Depending on the type of ink you are using the pot life can be as short as 8 – 10 hours, for example any inks that require a hardener. Therefore it is important to get your ink mixed up quickly for maximum production efficiency. We also can incorporate a dual purpose bucket holder for scraping and mixing.

 
 

 
 

Printing Industry
We have to be very careful how we handle our ink from mixing to pouring to the clean-up. The SPINOUT ® Patent Pending completely cleans all of the ink from our buckets and into the containment drums for reuse or proper disposal.

Bob L.